*Important- There are now two options available, one with a Stopper at the end of the webbing and one Non-Stopper. Please look at pictures to determine if your tent has the extra space for the Stopper, the vast majority do.*
 
These are replacement straps for the hold down side straps found on Tepui Tents and many others that share this same design. Many factory straps are velcro that eat themselves and constantly come apart. Our upgrade straps are Cordura webbing with ITW North America buckles and Gutermann Tera 40 reinforced stitching. Plus an additional reinforcement wrap outside of the plate where the straps mount to tent base to act as a secondary securement and remove some of the stress from the screw mount.
 
The average tent is approximately 8.5" from mounting point to mounting point, these are built to fit up to a 10.5" distance, anything longer will require a custom order. They are priced for a pair meaning 2 straps, but are available in 1 inch or 1.5 inch width for those that also want to upgrade to a wider strap. Made in USA by Rezistent Gear. Install Video Here
 
**Installation note: The video shows that the upper reinforcement will sit in the upper frame channel, I now manufacture them with the reinforcement facing outward to allow for a perfectly flat installation instead. The reinforcement is designed to go slightly outside of the plate, with the screws continuing to go thru the flattest portion of the webbing to allow for the best strength. The shortest strap with the female buckle will attach at the top and the longer strap with length adjustment will attach on the bottom frame to allow for easiest buckle usage.**
 
 
Please measure your specific tent before ordering to confirm that the standard length will fit. Custom length orders will require an additional email confirmation.
 
*These are NOT Billow Straps, these are the straps that hold the mattress shut below the cover.*